เครื่องวัดระดับแบบอัลตร้าโซนิค Ultrasonic Level Sensor

Lorem ipsum dolor sit amet, pri et feugiat consulatu. Eu per ceteros platonem. Ea dictas legendos ius. At adhuc solum has. Nec at harum euripidis, habeo elitr patrioque ne mel. Mei probo oportere posidonium in, has ei everti volutpat consequat.

(1) มีสินค้าพร้อมส่ง / จัดส่งฟรี Flash Express / รับประกันสินค้า 1 ปี (จากการใช้งานที่ถูกต้อง ตามคู่มือ)

฿ 15,000 ฿ 15,000

The TS-3 temperature sensor provides an input signal for temperature compensation of specific Siemens ultrasonic level controllers. Temperature compensation is essential in applications where temperature variations of the sound medium are expected. By installing the temperature sensor close to the sound path of the associated ultrasonic transducer, a signal representative of the sound medium’s ambient temperature is obtained. The temperature sensor should not be mounted in direct sunlight.

฿ 9,000 ฿ 9,000

Echomax XPS transducers use ultrasonic technology to measure level in a wide range of liquids and solids. The transducers can be fully immersed, are resistant to steam and corrosive chemicals, and can be installed without flanges.

฿ 0 ฿ 0

Echomax XPS transducers use ultrasonic technology to measure level in a wide range of liquids and solids. The transducers can be fully immersed, are resistant to steam and corrosive chemicals, and can be installed without flanges.

฿ 0 ฿ 0

Echomax XPS transducers use ultrasonic technology to measure level in a wide range of liquids and solids. The transducers can be fully immersed, are resistant to steam and corrosive chemicals, and can be installed without flanges.

฿ 0 ฿ 0

Echomax XRS-5 ultrasonic transducer provides reliable, continuous level monitoring of liquids and slurries in narrow lift stations/ wet wells, flumes, weirs and filter beds. The low-cost XRS-5 transducer is compatible with a full range of Siemens controllers, from a basic system for high/low alarm or simple pump control, up to advanced control systems with communications, telemetry and SCADA integration capabilities.

฿ 0 ฿ 0

The Probe is a short-range integrated ultrasonic level transmitter, ideal for liquids and slurries in open or closed vessels. The transducer is available in PVDF copolymer, making the device suitable for use in a wide variety of applications.

฿ 0 ฿ 0

The Pointek ULS200 is an ultrasonic non-contacting switch with two switch points for level detection of bulk solids, liquids and slurries in a wide variety of industries; ideal for sticky materials.

฿ 0 ฿ 0

The SITRANS Probe LU240 is ideal for level monitoring in the water and wastewater industry, chemical storage vessels, and small bulk hoppers. The range of SITRANS Probe LU240 is 6 or 12 m (20 or 40 ft). Using Process Intelligence, Auto False Echo Suppression for fixed obstruction avoidance, and accuracy of 0.15 % of range or 6 mm (0.25 inch), the Probe LU240 provides unmatched reliability. The Probe LU240 offers HART communication. The transducer on the Probe LU240 is available as ETFE or PVDF to suit the chemical conditions of your application. As well, for applications with varying material and process temperatures, the Probe LU240 incorporates an internal temperature sensor to compensate for temperature changes.

฿ 26,000 ฿ 26,000

The Probe is a short-range integrated ultrasonic level transmitter, ideal for liquids and slurries in open or closed vessels. The transducer is available in PVDF copolymer, making the device suitable for use in a wide variety of applications.

฿ 0 ฿ 0